metrowireless

“The use of electrical signals have slowly become obsolete, with the proliferation of fiber optic cabling. This new technology has been able to send data via pulses of light. Such data are kept within the optical fiber core through the total internal reflection phenomenon. This is capable of providing virtually fast Internet speeds. In order to know more about this new technology, it might help to know some pros and cons first. Here are some of them.

List of Pros of Fiber Optic Cable

1. Capacity of Bandwidth.
The pulses of light being produced by fiber optic technology are used to transmit data via the filaments of plastic or silica. On the other hand, copper cables have been used in order to transmit electricity-based signals. The difference in data transmission is very obvious, as the copper wires can transmit 50Mbps (megabits per second) while the fastest recorded transmission via fiber optic cables has so far reached 1.05Pbps (petabits per second) in which 1 petabit is equal to 1,073,741,824 megabits. This is like sending 5,000 HD videos in a single second.

2. Reliability of Signal.
Fiber optic technology can allow the transfer of data covering longer distances than other forms of communication. On this end, copper cables are able to send data for DSL of up to 5km before it will require regeneration, while fiber optics spans about 200km. For this reason, it won’t be susceptible to attenuation of signals that are caused by electromagnetic interferences. As a result, it will bring about lower error rates.

3. Safer to Use Than Conventional Materials.
This new technology offers circuits to be electrically isolated, making it safer to use in unsecure environments. Thus, it can be used safely even in explosive environments as fiber optic technology doesn’t carry any current.

4. Lighter and Thinner Cables.
In comparison to regular copper cables, fiber optic cables are 5x smaller and 20x lighter. As a matter of fact, the center of the fiber optic cable measures only about 10-15 micrometers, which is about a fifth the thickness of the regular human hair.”

Trivatech Group. TTG

www.trivatechgroup.com

888-352-6563

greengarageblogdotorg

“Fiber optic communication is one of the latest technologies for transmitting information from one place to another. The introduction of fiber optic communication has revolutionized the telecommunications industry, transforming into the fiber optic broadband Internet service we know today. Unlike traditional transmission methods that send signals through metallic-based systems, fiber optics are not electrical in nature. The transmission device generates a light signal, which the fiber cable carries to a receiver. The fiber optic thread is not an active source that generates electricity.

Unlike cable broadband and digital subscriber line (DSL) service, a fiber optic connection won’t degrade over distance, allowing for consistent premium data transfer speeds. However, fiber optic connections also come with some limitations. Their high performance is pricey, so range is limited by the effective cost of such service. Here we’ll take a broader look at the advantages and disadvantages of fiber optic communication networks.

Advantages of Fiber Optics

1) Quality of Connection: Fiber optics are highly resistant to electromagnetic interference and have a low rate of bit error. Electromagnetic interference (EMI) is a disturbance caused by electromagnetic radiation from an external source. This disturbance can interrupt or degrade the performance of a conventional metallic cable connection and can be caused by an object that carries electrical currents, such as power lines or even the sun. Fiber optics are also resistant to corrosion, making them a good option for beachfront properties where copper cabling would otherwise be susceptible to degradation by salt and seawater.

2) Scalability: Fiber optics are much more scalable in nature as new equipment can be added easily and laid over the original fiber. Wavelengths can be turned on or off on demand, which allows for the easy provisioning of services and quick scaling for a growing business. Optical fibers are also much smaller in size and lighter weight than copper wiring. These fibers can typically be put in place in preparation for growth needs up to 15 to 20 years in the future. Although growth is often speculative, spare fibers can be included for future requirements to accommodate growth. Alternatively, additional cables can be put in place at a later time to make way for network expansion.

3) High Security: Security is a major concern for today’s businesses. With fiber optics, the data passed through the network is incredibly secure. Fiber optics do not radiate signals, so there is no way to listen in on the transmissions passing through. Furthermore, breaches are easy to identify as soon as they occur as any physical break in the system will cause a total system failure. Instead of having hardware situated in multiple locations, fiber optic networks also allow you to keep all of the hardware in one location for easier regulation and maintenance.

4) Long-Term Cost-Effectiveness: Over the long term, fiber optic networks do not require the same overhead as copper networks, and as copper’s value on the scrap market grows, theft can also be a major concern for conventional copper wiring. Although the upfront costs for a fiber optic network are higher because of the skills necessary for proper installation, the long-term scalability outweighs the initial investment. As the popularity of fiber optics grows, we are likely to see a decrease in cost over time.”

Visit our website www.trivatechgroup.com or call 888-352-6563 to speak with our fiber experts.

Trivatech Group. TTG

Fieldnationdotcom